How to Choose a Boat Autopilot: Drive Type, Power and Installation
Hydraulic, mechanical and tiller drives, drive power by boat size, the compass sensor and calibration: what you need to know when choosing an autopilot.
An autopilot relieves the helmsman on long passages, holds the course to the destination on the chartplotter and, on sailing yachts, can steer to the wind angle. For an autopilot to work properly, a drive suited to the steering system and a correctly positioned compass sensor matter as much as the control unit on the display.
What does an autopilot system consist of?
- Control unit: The keypad or knob panel at the helm; on many systems it can also be controlled from the chartplotter.
- Processor (course computer): Evaluates sensor data and sends commands to the drive.
- Drive unit: The pump or motor that physically moves the rudder.
- Compass / heading sensor: Measures the boat's heading.
- Rudder angle sensor: Reports the rudder's position to the processor; recommended for most systems.
Drive type: according to your steering system
- Hydraulic pump: Used on motor yachts and larger sailing yachts with hydraulic steering. The pump size is chosen according to the steering cylinder's volume.
- Mechanical linear drive: Connects directly to the rudder quadrant; common on sailing yachts with cable or mechanical steering.
- Wheel and tiller drives: Practical, easy-to-install solutions for small sailing yachts.
- Electronic (steer-by-wire) systems: On some modern engine and steering systems, the autopilot is integrated directly into the steering system.
Drive power
The drive is chosen according to the boat's length and displacement. An underpowered drive cannot hold course in rough seas and wears out quickly, while an oversized one wastes energy. Choose according to the manufacturers' length and displacement tables, and go one size up on sailing yachts.
Compass sensor and calibration
The most common reason for an autopilot drifting off course or zigzagging is the compass sensor. The sensor should be mounted away from sources of magnetic interference such as engines, batteries, speakers and heavy power cables. After installation, compass calibration and autopilot tuning (rudder response, wind settings) should be done during sea trials. Satellite compasses provide a more stable heading.
Integration with the chartplotter
Running the autopilot on the same brand network as the chartplotter ensures that features such as route following, control from the display and steering to the wind angle work smoothly. Between different brands, basic data can be shared via NMEA 2000. You can browse the products on our autopilot page.
For the right autopilot for your boat, installation and calibration during sea trials, you can fill in the free quote form; for problems with your existing autopilot, create a service request.