Bodrum · Didim · Ören — sales · installation · service 📞 0530 467 14 64 · ✉ info@arelmarinelektronik.com · Instagram
Networks and Integration

What Is NMEA 2000? Bringing a Boat's Equipment Together on One Network

Backbone, drop cables, terminators and power supply: the basic rules of an NMEA 2000 network and the most common mistakes.

· 5 min read · Arel Marin Elektronik

NMEA 2000 is the standard that lets a boat's electronic equipment share data over the same network. Devices such as the wind sensor, GPS, compass, depth, engine data and autopilot connect to a single cable backbone, so every display can show all the data.

Network structure

  • Backbone: The main cable of the network, running the length of the boat.
  • T-connector and drop cable: Each device is connected to the backbone with a T-connector and a short drop cable. A single drop cable should be no longer than 6 metres.
  • Terminator: One terminator is fitted at each end of the backbone (two in total). Missing or extra terminators are the most common cause of network faults.
  • Power: The network is powered with 12 V. On long backbones the power point is usually chosen near the middle of the network to prevent voltage drop.

Different brand names

Raymarine Brand networks such as SeaTalkNG and Simrad SimNet are based on NMEA 2000. They can be connected to the same network with suitable adapter cables. Garmin and many brands use the standard Micro-C (DeviceNet) connector.

How it differs from NMEA 0183

NMEA 0183, found on older equipment, works point-to-point, and usually one device sends data to a single device. NMEA 2000, by contrast, is a network in which many devices talk at the same time. 0183–2000 converters can be used to add older equipment to the network.

The most common problems we see

  1. A missing terminator or one fitted in the wrong place
  2. Powering the network from more than one point
  3. Corroded or poorly seated connectors
  4. Drop cables that are too long, or daisy-chaining instead of a backbone
  5. Data not appearing because device software is out of date

Data disappearing from displays, devices not seeing each other or the autopilot not receiving heading data usually come from the network. For such problems you can create a service request. Under symptoms, tick "Devices can't see each other (network)".

💬