The Difference Between AIS Class A and Class B: Which Does Your Boat Need?
The differences between an AIS receiver, Class B (CSTDMA and SOTDMA) and Class A transponders: transmit power, update rate, installation and which suits which boat.
AIS (Automatic Identification System) is the system by which boats automatically broadcast their position, course, speed and identity on the VHF band. On the chartplotter you see surrounding vessels with their names and courses and can spot collision risks early. But not every AIS device is the same: receive-only units, Class B and Class A transponders serve different needs.
AIS receiver: seeing without being seen
An AIS receiver only receives other vessels' broadcasts; your boat does not appear on anyone else's screen. Many VHF radios and chartplotters have a built-in AIS receiver. It may be enough as a starting point for small boats making daytime coastal trips, but for night passages and heavy traffic, being visible yourself makes a big difference.
Class B: for leisure boats
Class B transponders both receive and transmit. There are two types:
- Class B CSTDMA: Transmits at about 2 W and sends its position roughly every 30 seconds underway. Economical and sufficient for most leisure boats.
- Class B SOTDMA (Class B+): Transmits at about 5 W, and its reporting interval shortens with speed. It provides more reliable visibility at longer range and in heavy traffic; recommended for fast motor yachts and offshore sailing yachts.
Class A: commercial vessels and large yachts
Class A transponders transmit at 12.5 W, send their position every few seconds underway and include extra voyage data such as destination, estimated time of arrival and navigational status. They are mandatory on ships covered by international conventions; for commercial yachts and some other boats the requirement depends on the flag state and type of use. We recommend checking your boat's status against the flag state's rules.
Points to consider during installation
- MMSI number: The transponder must be programmed with your boat's MMSI number before it can transmit.
- Antenna: A separate VHF antenna gives the best performance; the existing VHF antenna can also be shared using a suitable splitter.
- GPS: The transponder needs its own GPS antenna or a built-in GNSS receiver.
- Connection: It joins the same NMEA 2000 network as the chartplotter, radio and autopilot. Details: What is NMEA 2000?
Which should you choose?
For leisure boats cruising along the coast, Class B CSTDMA is usually sufficient. For night passages, fast cruising or busy routes, Class B SOTDMA is a better choice. If there is commercial use or a legal requirement, Class A is needed. You can compare AIS devices on our VHF radio and AIS products page.
For the right AIS device and installation for your boat, you can fill in the free quote form or message us on WhatsApp.