Digital switching
Lighting, pumps, fans and other DC circuits are controlled and protected by EmpirBus modules instead of a conventional breaker panel; wiring is reduced.
Garmin EmpirBus lets the boat's lighting, pumps and all DC circuits be managed from the chartplotter, a touchscreen and a phone. Survey, design, installation, programming and service for EmpirBus NXT, Connect 50 and Garmin Boat Switch systems.
EmpirBus manages circuits with digital modules instead of a conventional breaker panel; the whole system comes together in one interface on Garmin displays.
Lighting, pumps, fans and other DC circuits are controlled and protected by EmpirBus modules instead of a conventional breaker panel; wiring is reduced.
Circuits are managed from Garmin GPSMAP and ECHOMAP displays, the TD 50 touchscreen, EmpirBus keypads or your phone.
Battery voltage, tank levels, bilge pump activity and sensor data are monitored; if there is a problem, an alert appears on the screen and on your phone.
For anchoring, night mode or shutting down the boat, several circuits are switched with a single touch.
The colour, brightness and music-synced effects of the boat's LEDs are controlled from the chartplotter and the Fusion audio system.
When you are away from the boat, battery, bilge, shore power and position information reaches your phone over 4G.
Click a product to see its specifications and product codes.

Professional digital switching module with high- and low-side outputs, up to 100 A, for boats with many circuits.
View →
Compact EmpirBus digital switching module with 20 high-side and 4 low-side outputs.
View →
The main control unit (MCU) that runs the EmpirBus system and the Wi-Fi display unit (WDU) that brings the system to displays.
View →
Backlit programmable 8- and 12-key panels that control circuits in the EmpirBus system.
View →
Digital switching system that controls the boat's electrical circuits from a Garmin GPSMAP or ECHOMAP display.
View →
LED control module that manages the boat's LED lighting from the chartplotter, phone or Fusion stereo.
View →
5" touchscreen control display that controls boat systems, sensors and the audio system.
View →
Remote monitoring system that sends battery, bilge, security and position information to your phone when you are away from the boat.
View →| System | Suitable boat | Featured |
|---|---|---|
| Garmin Boat Switch | Small and medium motorboats | Easy installation, control from the chartplotter, 20 outputs |
| EmpirBus Connect 50 | Medium-sized boats, sailing boats | Compact, 20 + 4 outputs, flexible programming |
| EmpirBus NXT DCM | Large motor yachts and gulets | High current, multi-module, fully programmable |
Saloon, cabin and deck lighting with scenes; bilge pumps, tanks and batteries are monitored from the chartplotter on the flybridge.
Lighting and fans in the guest cabins from a single screen; faults are sent as notifications to the captain's phone.
Navigation lights, anchor light and pumps from the keypad; energy use and battery status are monitored continuously.
Our team holds the EmpirBus technical introduction training and EmpirBus training module certificates issued by EmpirBus.
On digital control projects we work together with our solution partner Alphamare. Other digital control systems: Naviop, CZone, Scheiber.
EmpirBus is a digital switching system that digitally controls and monitors a boat's electrical circuits. Originally from Sweden, EmpirBus is now part of Garmin; the system works fully integrated with Garmin chartplotters, the TD 50 display, keypads and the mobile app.
A conventional panel has a separate switch and fuse for each circuit, with long cables running through the boat. With EmpirBus, power modules are placed close to the circuits and controlled digitally over NMEA 2000; wiring is reduced, fuses are monitored by software and faults appear on screen instantly.
Boat Switch is an easy-to-install package for small and medium boats, controlled from the chartplotter. Connect 50 is a flexible, compact digital switching module for medium-sized boats. EmpirBus NXT DCM is the core module of the high-current, fully programmable professional system for large boats with many circuits.
Yes. After examining the existing electrical panel and circuits, the transition can be made in stages: lighting and pumps first, then tanks, batteries and other systems in later stages.
Compatible Garmin GPSMAP and ECHOMAP chartplotters, the Garmin TD 50 touchscreen, EmpirBus SP8/SP12 keypads, and tablets and phones via the Wi-Fi display unit (WDU) can be used.
EmpirBus modules can be designed with manual control and fuse bypass for critical circuits; when the system is installed we decide together which circuits must also work by hand.
Yes. Our team holds the technical training certificates issued by EmpirBus (Technical introduction to EmpirBus); the certificates can be verified via the links on our page.
Yes. We diagnose faults caused by modules, panels and configuration, replace modules, update software and revise systems. On digital control projects we work together with our solution partner Alphamare.
Packaged systems such as Boat Switch are usually installed in one to two days. On large boats, NXT systems are planned after a survey based on the number of circuits and the wiring.